top of page

3D-Drucker-Mods

This is my Marlin 2.0.9.2 Main Board and TFT firmware to be used with a BL-Touch. Nozzle to probe offsets are configured for my BL-Touch mount of which there is the STL file included in the download.

SWX1 BL-Touch Install Files

This is my Marlin 2.0.9.2 Main Board and TFT firmware to be used with a BL-Touch. Nozzle to probe offsets are configured for my BL-Touch mount.

Read More
STL files and firmware required to install a Hemera on your Sidewinder X1. The STL files will also work for the X2 and both Genius models. NOTE: Firmware is only for SWX1.

SWX1 Hemera Install Files

STL files and firmware required to install a Hemera on your Sidewinder X1. The STL files will also work for the X2 and both Genius models. NOTE: Firmware is only for SWX1.

Read More
Parts to help you install MGN12H linear rails on the Y axis of your Sidewinder X2/X1/Genius?Genius Pro. Use the hold jig to assist in drilling the required mounting holes on the carriage plate for the bearing blocks. Use the Rail Jig, 3 of them, to align and space the rails on the 2060 Y axis aluminum profile. Use the Belt mount to hold the belt at the correct offset, no need to change belt motor or tensioner location. And use the end stop spacer under the end stop. This will require M5 and M3 hardware along with Tee Slot Nuts.

SWX2/X1/ Genius/ G-Pro Linear Rail Conversion, Y Axis

Pintables to assist in the installation of MGN12H linear rails on a Sidewinder X2/X1/Genius/Genius Pro

Read More
bottom of page